DIY Flip Flop Makeover
This diy flip flop makeover is an easy craft that will bring like back into those old flip flops.
TOOLS & MATERIALS:
1 Pair of flip-flops
1 Spool ½ inch ribbon
Lots of beads in assorted sizes
Tiny seashells
Hot glue gun
Needle and thread
Step 1 Place a small amount of hot glue on the outside of the flip flop strap at the base and attach the end of your ribbon.
Step 2 Continue wrapping your ribbon around the straps on your flip-flops until they are completely covered. Add small amounts of hot glue to hold your ribbon as you go and secure the end when you are finished with hot glue as well.
Step 3 Take your ribbon again and wrap it around and back and forth across the center "V" of your flip-flops to fill in.Be careful not to make your "V" to high or if you really do want it to go higher, make sure you wrap it loosely otherwise it will be difficult to get your foot into.
Step 4 You’re ready to start adding your beads. Add your beads one at a time sewing them on, (I put a small drop of hot glue under all of the large and medium sized beads as well as the seashells before sewing them). I stitched through each bead 2 times before going on to the next bead.
